In this guide
1. Start with the container
The shape of the container decides the type of machine more than anything else.
- Round bottles and jars are labelled while they roll: a Wraparound Labelling Machine applies full, partial or overlap wraps. For pharmaceutical lines, the Wraparound Pharma Labelling Machine adds guarding and servo control.
- Flat, oval, square and rectangular bottles need labels on two faces. A Front & Back Labelling Machine does both in one pass.
- Lines that run many different products can use the Front/Back & Wraparound Combi Machine, which handles front, back, top, L-seal, U-seal and wraparound on one frame.
- Cartons, boxes, trays and pouches are labelled from above with a Top Labelling Machine, or a Pouch Labelling Machine for stand-up and flat pouches.
- Caps, necks and security seals go on with a Hologram Applicator or the Top & Side Labelling Machine.
- High-volume round bottles with registered labels suit a Rotary Labelling Machine; water and soft drink bottles with film wraps suit a BOPP Roll-Fed Hot Melt Labelling Machine.
2. Match the speed to your line
Take your filling or capping output per minute and choose a labeller that comfortably exceeds it, so the labeller never becomes the bottleneck. These are the top speeds of our machines; the real figure depends on your container and label size.
| Machine | Speed |
|---|---|
| Front & Back Labelling Machine | up to 300/min |
| Wraparound Labelling Machine | 60-180/min |
| Front/Back & Wraparound Combi Machine | 60-300/min |
| Hologram Applicator | up to 300/min |
| Top Labelling Machine | 40-240/min |
| Top & Side Labelling Machine | 40-240/min |
| Pouch Labelling Machine | 40-60/min |
| Wraparound Pharma Labelling Machine | 60-240/min |
| Tamper-Evident Carton Labelling Machine | 60-300/min |
| Rotary Labelling Machine | up to 240/min |
| BOPP Roll-Fed Hot Melt Labelling Machine | up to 200/min |
| Print & Apply Labelling System | 7-30/min |
| Non-Stop Labelling Splicer | up to 300/min |
| Label Rewinder | up to 500/min |
3. Check the label
Most of our self-adhesive labellers take labels from 25 × 25 mm up to 250 × 250 mm, in paper, PP, PE or clear film. Clear "no-look" labels need a sensor that can see them; our machines use an ultrasonic sensor that reads paper and transparent film alike. Small security labels and holograms (from 16 mm) need a dedicated Hologram Applicator, and roll-fed BOPP film wraps need a BOPP Roll-Fed Hot Melt Labelling Machine rather than a self-adhesive labeller.
4. Decide how you will print batch and expiry
There are two ways to put variable data on a pack:
- Print on the labeller. A TTO, TIJ or CIJ printer mounted on the labelling machine prints batch number, expiry date and price on each label just before it is applied. This suits most bottle and carton lines.
- Print and apply. A Print & Apply Labelling System prints the whole label, including barcodes, and applies it in one step. This suits shipper cartons and boxes that need unique codes, and offers tamp, dual tamp, corner wrap and swipe applicators.
5. Regulated products and security
Pharmaceutical customers often need an audit trail of who changed which setting; our machines can be supplied with a US FDA 21 CFR Part 11 compliant design. To catch problems on the line, add missing-label detection, barcode and QR verification, or camera inspection with automatic rejection. For cartons, a Tamper-Evident Carton Labelling Machine seals the flaps so an opened pack shows at once.
6. Plan for changeovers
If you run many sizes, ask how a size change is done. Our automatic labellers need no change parts between container sizes; settings are saved as recipes on the touch screen. On fast lines, a Non-Stop Labelling Splicer joins a new label roll on the run so the line does not stop for roll changes.
7. Automatic or semi-automatic?
For trials, short runs or a new product, Semi-Automatic Labelling Machines are a low-cost start: the operator places each product and the machine places the label. Once volumes grow past what one operator can handle comfortably, an automatic machine on a conveyor pays for itself in labour and consistency.
8. What to send for a quote
- A photo or sample of the container, with its size and material
- The label, or its size and material, and where it goes on the pack
- The speed you need, per minute
- Whether you need printing, inspection or safety guarding
- The power supply available on your line
Send these to Sales@acuronautomation.com or through our enquiry form, and an engineer will reply within one working day.